Xtyle Odeon Wave Beach 3D Guide D'utilisation page 3

Important: Safety Information
Before use, please simply read the following important
safety information. Following these guidelines will
ensure trouble-free operation and optimal performance
of your new X.O. Wave Beach 3D headset in connection
with your smartphone or tablet.
1. Avoid pulling on the cords or cables. Always grip the
cable firmly when unplugging from the headset.
2. This product has not been designed to sustain high
temperature such as inside cars staying for hours in
direct sunlight. Avoid exposure to external heat sources;
direct, prolonged sunlight; dust; corrosive chemicals;
and moisture. When you do not use your device, please
keep your headset in a dry location, protected from high
temperature.
3. It is normal for electronic devices to warm during use.
Avoid placing the headset near heat-sensitive materials
or magnetic fields.
4. Do not drop your headset or subject it to shocks.
5. Do not place anything on top of it when in use.
6. Always use the supplied cables and connectors, or X.O.
original cable. Use of non-original X.O. cables, or cables
not supplied with your smartphone or tablet constitutes a
misuse and may result in injury or damage.
7. Do not attempt to service or disassemble! This product
is not user-serviceable! Attempting to disassemble,
service or temper with the headset can result in electrical
hazard, including death from exposure to high voltage.
If you experience problems with the unit, discontinue
use and contact X.O. customer service for assistance.
Attempting to open or repair will void all warranties,
4
express or implied.
8. Do not use your new headset in a humid or wet
environment such as a bathroom. Do not poor beverage
or liquid on your headset. Do not use while under a
shower or in a bath, or under running water due to risks
of electrocution. Never place your new headset in a
microwave oven.
9. Leave enough unobstructed space around the headset
when in operation.
10. Do not place any object against the connector when
plugged in.
11. To avoid damage to your cable, device and charger,
pay attention to not force cables in and out of the
connector(s), and leave cable connected to the headset
unbent, especially do not place objects against connected
cable, forcing the cable to bend close to the connector(s).
12. Save energy: unplug your charging cable when the
headset is fully charged and place it in safe and dry
location. Please do not dispose of your headset in trash
bins but recycle with your other electronic products.
5