Tail/Brake Light Bulb Replacement - Yamaha Raptor Yfm350 2003 Manuel Du Propriétaire

1. Screw (× 2)
1. Vis (× 2)
1. Perno (× 2)
1. Bulb
1. Ampoule
1. Bombillas

Tail/brake light bulb replacement

1. Remove the lens by removing the screws.
2. Remove the defective bulb by pushing it in-
ward and turning it counterclockwise.
3. Install a new bulb by pushing it inward and
turning it clockwise.
4. Install the lens by installing the screws.
CAUTION:
_
Do not overtighten the screws as the lens may
break.
_
8-103
EBU12170