Genie GM A3 Mode D'emploi page 4

UK
Model
Max. format
Cutting length
Max Cutting capacity (80g/m2)
Cutting table
Dimensions
Weight
INSTRUCTION
Place the guillotine on a stable flat surface. Lift the blade up to its maximum position.
Place the paper on the guillotine underneath the transparent blade-guard and hold the transparent
blade-guard down to fix the paper. Lower the blade with the right hand.
Side Notes: Please place the paper into the correct position as images below to start cutting paper
MAINTENANCE
• Clean guillotine with a dry cloth. Never use solvents or water.
• To prolong the life-time of the blade, it is recommended to regularly wipe it down with a
silicone fluid, liquid Vaseline or other rust-preventative oil.
• Should the blade loosen, follow the 2 below steps to tighten the blade:
[A] Use a screw driver to dismantle the grey part as shown in the image below.
[B] Use a hex screw driver to tighten the screw bolt with one hand, while using wrench to hold the nut
in place with the other hand. See image below.
[A] [B]
GM A3
A3
460 mm
10
380x460 mm
510x450x60 mm
3,60 Kg
-4-
GM A4
A4
320 mm
12
250x320 mm
350x300x60 mm
2,20 Kg