Controls And Displays; Safety Instructions - Hama IT900MBT Notice D'utilisation

G Quick Guide

Controls and Displays

Radio
Front
1. [POWER] button
2. Status LED
Rear
3. Optical connection
4. Power connection (Micro-USB)
5. Line-out socket
6. USB playback / update port
1. Explanation of Warning Symbols and Notes
Risk of electric shock
This symbol indicates product parts energized with a
dangerous voltage of sufficient magnitude to constitute
a risk of electric shock.
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• 'IT900MBT' streaming tuner
• Micro-USB charger
• Micro-USB cable
• 3.5 mm jack cable
• Operating instructions
• Spotify flyer
2

3. Safety instructions

• This product is intended for private, non-commercial
use only.
• Protect the product from dirt, moisture and overheating,
and only use in dry locations.
• Keep this product, as all electrical products, out of the
reach of children!
• Do not drop the product and do not expose it to any
major shocks.
• Do not operate the product outside the power limits
given in the specifications.
• Keep children away from the packaging material as there
is a risk of suffocation.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the device in any way. Doing so voids the
warranty.
Risk of electric shock
• Do not open the device or continue to operate it if it
becomes damaged.
• Do not use the product if the
• AC adapter, adapter cable or power cable is
damaged.
• Do not attempt to service or repair the product
yourself. Leave all service work to qualified experts.
4. Information and notes before initial startup
Preparing the network connection / Internet
connection
You can integrate this tuner into a local network and
access home servers or other shared resources. To receive
Internet radio
or access non-local media contents (streaming, such as
Spotify Connect), the network must be connected to the
Internet.
WLAN/WiFi connection (wireless network)
• Make sure that the router is on and that you have an
Internet connection.
• If it is not already activated, activate the WLAN
connection of your router.
• If you have questions about router configuration,
please consult the operating manual of the router for
troubleshooting.
• A detailed description of how to configure the WLAN
connection is given in the Wireless connection section.