Table des Matières
Publicité
STEP #6 / ÉTAPE #6
A- Make sure all O-rings are well positioned behing the cartridge rough-in
B- Insall the cartridge rough-in instde the box using the six screws.
A- Assurez vou que les O-rings à l'arrière du brut de cartouche sont bien en place.
B- Installer le brut de cartouche à l'intérieur de la boite à l'aide des 6 vis.
STEP #7 / ÉTAPE #7
A- Apply a silicone joint on the top and on each side of the box and press firmly on the plate.
B- Asssemble the handles.
A- Appliquer un joint de silicone en haut et de chaque côtés et positionner la plaque de finition.
B- Assembler les poignées en retirant les cache vis et serrer les vis de pression.
Page. 10
NOTES
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
______________________________________________
B
Page. 9
Publicité
Table des Matières
