Verilux HappyLight Touch Plus Mode D'emploi page 4

• Use a quality surge suppressor on all electronic equipment. Voltage variations and
spikes can damage electronic components in any system. A quality suppressor
can eliminate the vast majority of failures attributed to surges. Suppressors may be
purchased at electronics stores.
• Never cover the lamp or place anything on top of it when it is in operation.
Setup – Remove Stand
1
Setup – Affix Stand
2
Affix stand by inserting tabs on
stand into slots at base of lamp
and pressing together.
VT42_MAN_Rev5-002.indd 4 VT42_MAN_Rev5-002.indd 4
Important Safeguards — continued
CAUTION:
SAVE THESE INSTRUCTIONS
Setup and Take Device Pretest
• The stand is affixed to the back of the
HappyLight
• To remove stand, slide stand upward to remove
from keyhole
— continued
Therapy Lamp
®
slots
tabs
4
2/21/20 4:48 PM 2/21/20 4:48 PM