Using The Straightener/Curler - Medion MD 16621 Mode D'emploi

6. Using the straightener/curler

 Remove all packaging material. Ensure that there are no foreign bodies on the
straightening iron plates or curling tong.
 Wash your hair as usual and let it dry. Comb or brush your hair to remove any
knots.
 Connect the mains cable to a properly installed AC 100-240 V~, 50/60 Hz safety
socket.
WARNING!
Risk of injury due to burns/risk of fire due to hot
surfaces.
Some parts of the appliance may become very hot dur-
ing use.
 During operation, touch the appliance only by the
handle, the cold plastic cap on the curling tong or
the tong lever. Avoid any contact with skin (especial-
ly on the face, ears, neck and scalp) with the hot sur-
faces of the appliance.
 During use, do not place the appliance on any flam-
mable materials such as cushions, blankets, towels,
etc.
 Press the
button for approx. 3 seconds to switch on the appliance.
The temperature display shows the current temperature.
 Press the + button to increase the temperature in steps of 20°C, or the – to re-
duce the temperature in steps of 20°C. The set temperature will appear briefly on
the temperature display and is replaced by the display of the current tempera-
ture.
 Press the + button for about 3 seconds to retain the current temperature. LOC
is displayed.
Press the + button again to reset the temperature setting.
NOTICE
 To avoid hair damage, do not leave the heating plates in one position
for any longer than a few seconds (depending on the hair type). Start
at a low temperature level and exposure time to find out the appro-
priate application for your hair.
 Choose a suitable temperature for your hair type:
− low temperature for fine, colour-treated or damaged hair,
− medium temperature for normal hair,
− high temperature for thick hair.
58 of 64