Philips HD927X Guide D'utilisation page 15

Problem Possible cause
Several appliances are
connected to one outlet.
I see some peeling Some small spots can
off spots inside my appear inside the pan of
Airfryer. the Airfryer due to the
incidental touching or
scratching of the coating
(e.g. during cleaning with
harsh cleaning tools and/
or while inserting the
basket).
White smoke comes You are cooking fatty
out of the appliance. ingredients.
The pan still contains
greasy residues from
previous use.
Breading or coating did
not adhere properly to the
food.
Marinade, liquid or meat
juices are splattering in the
rendered fat or grease.
My display shows The device is broken/
"E1". defect.
Solution
The Airfryer has a high wattage. Try a
different outlet and check the fuses.
You can prevent damage by lowering the
basket into the pan properly. If you insert
the basket at an angle, its side may knock
against the wall of the pan, causing small
pieces of coating to chip off. If this occurs,
please be informed that this is not harmful
as all materials used are food-safe.
Carefully pour off any excess oil or fat from
the pan and then continue cooking.
White smoke is caused by greasy residues
heating up in the pan. Always clean the pan
and the basket thoroughly after every use.
Tiny pieces of airborne breading can cause
white smoke. Firmly press breading or
coating to food to ensure it sticks.
Pat food dry before placing it in the basket.
Call the Philips service hot line or contact
the Consumer Care Center in your country.
ENGLISH
17