Turning Off The Warming Cabinet; Reducing The Set Point Temperature; Cleaning The Filter - Summit PHC51G Mode D'emploi

Turning Off the Warming Cabinet

To turn off the appliance, switch the circuit breaker on the control panel to OFF.

Reducing the Set Point Temperature

The operating temperature is factory-set to 150°F, but you can reduce this "Set
Point" by following this procedure:
1. Turn on the power by switching the circuit breaker on the control panel to
RESET.
2. Press and release the SET button.
3. Press either the UP or DOWN arrow on the control panel to reach the
desired temperature (Set Point).
4. Press SET again to complete the process.

Cleaning the Filter

To ensure your warming cabinet is working properly, regular cleaning of the lint
filter is required. Simply remove the lint filter from the unit and wash it with
soapy water. Rinse completely with clean water. Allow the filter to dry before
placing it back in the unit.
7