Preventive Maintenance; Troubleshooting - Summit PHC51G Mode D'emploi

Preventive Maintenance

Twice a year, place a thermometer near the fan inlet of the cabinet in order to
check the accuracy of the temperature setting. The actual temperature should
be within plus or minus 3 Fahrenheit degrees of the set temperature.
You can easily solve many common problems with your appliance, saving you
the cost of a possible service call. Try the suggestions below to see if you can
solve the problem before calling a service technician.
Problem
Appliance does not
get warm.
Appliance turns on
but does not reach
the set temperature.
The door will not
close properly.
If your appliance shows other symptoms than those described above, or if you
have checked all items listed as the cause and the problem still exists, then call
SUMMIT PureTherm Customer Service at

TROUBLESHOOTING

TROUBLESHOOTING GUIDE
Possible Cause
Not plugged in; power is off.
The circuit breaker has tripped or fuse has blown.
Door is not closed.
Allow up to several hours of operating time for the
unit to come to temperature.
Listen to determine if the fan is operating. If not,
call for service.
The appliance is not level.
The gasket is dirty.
The shelves are out of position.
1-800-932-4267
9