Configuring The Configurator - Vokkero GUARDIAN EUROPE Standard Mode D'emploi

VOKKERO GUARDIAN EUROPE Standard - User Guide V1.3.1
4.3.3.

Configuring the configurator

Use this setting to adjust the screen.
In this area, you can adjust the screen lighting, calibrate the touchscreen, and update
the configurator firmware.
1 - Adjusting the screen lighting
Slide the cursor from left and right to decrease and increase, respectively, screen lighting.
GB
2 - Calibrating the touchscreen
The configurator touchscreen is already
calibrated in the factory; you can howe-
ver calibrate your own touchscreen if
you note a significant change in screen
detection.
To do this, carry out the following 5
steps:
Select each angle with the yellow poin-
ter, then select the circle at the middle
of the screen.
The calibration is complete.
54 / 106