Operating The Amplifier - Revox Evolution Mode D'emploi

evolution
le
Ce
Operating the amplifier
Amplifier menu
The following settings can be made while a source
(tuner, CD, tape, ...) is active.
* — Press the amp (12) key.
input : tuner _
speakers: AB &
nc
Se
Switching the speaker groups on/off
e The field on the top right of the display identifies the
active speaker pair: A or B, A and B, or none (only
headphones output active).
e Speaker pair A is always active when the system is
switched on. To protect the speakers, the switch-
on volume is limited to a maximum level.
Adjusting the volume
¢ The volume is displayed in the bottom section of the
display (9). The volume can be adjusted with the
volume (15) potentiometer. The volume setting is
shown on all display pages (cd, amp, tuner, tape, ...).
REVOXx'
Adjusting the bass/treble and balance
Amplifier setup menu
intensity
Tt
version XxX.xx
ANU
¢ The current software version is displayed.
¢
Foradjusting the brightness of the display (9), press
the down (2) or up (6) key.