Edesa EIM-6328 B WH Manuel D'instructions page 28

EN
of timing from 1 to 99 minutes.
3. When the time is set, it will begin to count down immediately. The display will
show the remaining time and the dot next to timer indicator will keep on flashing.
4. Buzzer will bips and the timer indicator will turn off when the setting time
finished.
Setting the timer to turn one cooking zone off
1. Select the relevant cooking zone by touching the power level slider (3) to
set the power lever you required. The dot next to power level indicator will
flash for 5 seconds.
2. Before the dot stops flashing, touch the timer (1), you can realize the setting
of timing from 1 to 99 minutes.
3. When the time is set, the timer indicator will flash for 5 seconds and the
countdown will begin immediately. The display will show the remaining time.
4. After that, if the indicator will keep on flashing meaning that the timer setting
indicator shows the cooking zone remaining time until the timer expires; or
else the indicator will keep on lighting until the timer expires.
5. When cooking timer expires, the corresponding cooking zone will be
automatically switched off and the display will show "H". Other cooking zone
will keep operating if they are turned on previously.
6. When using "the timer as an alarm" and "the timer to switch off the zones"
together, the timer setting indicator will show the remaining time of alarm
as first priority. Press power level slider (3) of the cooking zone to show the
remaining time of switch off timer.
Hints and Tips
Problem
The induction
hob cannot be
turned on.
The touch
keys are
unresponsive.
Possible causes
No power.
The keys are locked.
What to do
Make sure the induction hob is
connected to the power supply
and that it is switched on.
Check whether there is a power
outage in your home or area.
If you've checked everything
and the problem persists, call a
qualified technician.
Unlock the keys. See section
'Using your induction hob for
instructions.