ensto Smartcloser NX2008287 Manuel D'installation page 86

STEP 8: earthing connexion
The Smartcloser is intended to be installed in equipotentiality. All metal parts must be connected to
the main grounding cable. The earthing circuit consists of a 25mm² minimum copper cable that
goes down along the pole and must remain fixed as far as possible from parts under tension.
SMARTCLOSER - N°IFS NX2008287 / N° 72740_08
01.10.2020
86 (101)
M 12
W 12
M 12
H M12
H M12