Bestron AJQ668 Mode D'emploi page 21

Instruction manual
W arm up glass panels in winter by pre-steaming at a distance of 30 cm with a little steam before starting
to clean.
operAtIon - steam cleaning
1. Fill the water tank with water (see 'Filling the tank with water').
2. Fit the appropriate accessory (see 'Fitting the accessories').
3. Put the plug into the wall socket
4. The appliance will heat up (± 3 minutes), the indicator light (7) illuminates.
5. The appliance is ready for use once the light extinguishes.
6. D uring cleaning the steam control light illuminates and extinguishes variable. This is normal because the
appliance frequently heats up automatically in the meantime.
7. Slide the lock button forward on the steam button to unlock.
8. P ress the steam button (3). Steam will escape as long as the steam button is pressed down. Just release
the steam button to stop.
9. M ove the appliance backwards and forwards over the object to clean it. For optimum results keep the cloud
of steam close to the surface; this will offer the steam most chance to penetrate the dirt.
10. W hen you have finished, put the appliance down where the steam will not contact any surfaces and allow
the last steam to escape.
11. Remove the plug from the wall socket and allow the appliance to cool down completely.
operAtIon - refilling the water tank
When the appliance stops steaming, the water tank may be empty. Now proceed as follows:
1. Remove the plug from the wall socket and let the appliance cool down for at least 5 minutes.
2. Slide the lock button forward on the steam button to unlock.
3. Press the steam button and discharge the remaining steam.
4. Unscrew the pressure cap and fill with fresh water (max. 250ml).
I f you have been working with the appliance up to now, the water tank will still be hot. In this case slowly
and carefully fill with water. The water could splash out of the tank.
5. Fasten the pressure cap by turning it clockwise.
6. Put the plug into the wall socket. The appliance will heat up (± 3 minutes), the indication light illuminates.
7. The appliance is ready for use once the light extinguishes.
cleAnInG AnD MAIntenAnce - cleaning
1. Remove the plug from the wall socket.
2. Allow the appliance to cool down completely.
3. Clean the exterior of the appliance and the accessories with a damp cloth and a little washing-up liquid.
4. Clean the cleaning cloth in a washing machine ('Cottons' program, 40 °C).
5. Store the handheld steam cleaner.
N ever immerse the appliance, plug or power cord in water. Never use corrosive or scouring cleaning
agents or sharp objects (such as knives or hard brushes) to clean the appliance.
cleAnInG AnD MAIntenAnce - Descaling
When you fill the tank with tap water, the appliance should regularly be decalcified to increase the life and the
functioning of the device. To obtain a longer life you should rinse the appliance with water after you used it
about 10 times. Fill the tank with a solution of water and vinegar in a ratio of 75% water 25% vinegar. Do not
use chemicals
Leave the cap open, and switch on the appliance and wait until the solution begins to boil. Turn the appliance
off and wait for 5-10 minutes, pour out the solution and rinse 2-3 times with water.
L oosen the cap when you do not use the device for a long period of time.
21