Télécharger Imprimer la page

DeLOCK 18911 Mode D'emploi page 3

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
English
System requirements
• PC or laptop with a free USB Type-C™ port
• USB connection cables
• Power source with a free USB Type-A port
Package content
• Switch bidirectional
• USB power cable, length: ca. 1 m
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
Installation
Note:
For the installation of the hardware all devices should be turned off.
1.
Connect the USB data switch to your peripheral device and to your
computers with suitable USB cables (sold separately).
2.
Plug in the USB-C™ power cable to a USB Type-A port or power supply.
3.
Power up your computers and the peripheral device. Your device will now be
ready to switch between computers.
Operation
The LED on the USB 2.0 data switch will indicate which computer is currently
connected to the peripheral device. To switch devices between computers simply
press the corresponding button.
Note
• Do not switch to a computer that is in the process of booting.
• Before switching, ensure that the attached USB device is not in use, like reading
/ writing data, printing etc.
• Please use short length and high-quality cables, especially for higher
resolutions.
-3-

Publicité

loading