Tripp-Lite PDUMH30 Manuel D'utilisation page 2

Installation
Note: The illustrations may differ somewhat from
your PDU model.
1 Determine Installation Configuration. The PDU
supports four primary installation configurations:
1U Rack, 0U Rack, Wall and Under-Counter.
Choose a configuration and follow the installation
instructions in the appropriate section of Step 1
before proceeding to Step 2.
Note: Regardless of installation configuration, the
user must determine the fitness of hardware and
procedures before mounting. The PDU and
included hardware are designed for common rack
and rack enclosure types and may not be
appropriate for all applications. Exact mounting
configurations may vary.
1-1 1U Rack Installation. Attach the PDU to the
rack by inserting four user-supplied screws (A)
through the PDU mounting brackets (B) and into
the mounting holes of the rack rail as shown.
1-2 0U Rack Installation. Part 1: Remove the screws
(C) attaching the mounting brackets to the PDU,
change the orientation of the brackets as shown
and reattach the brackets. Use only the screws
supplied by the manufacturer or their exact
equivalent (#6-32, 1/4" flat head). Part 2: Attach
the PDU vertically by inserting two or more user-
supplied screws (A) through the PDU mounting
brackets (B) and into mounting points in the rack
or rack enclosure.
1-3 Wall Installation. After repeating Part 1 above,
attach the PDU to a stable mounting surface by
inserting two or more user-supplied screws (A)
through the PDU mounting brackets (B) and into
secure mounting points on the mounting surface.
1-4 Under-Counter Installation. After repeating
Part 1 above, attach the PDU to a stable mounting
surface by inserting four user-supplied screws (A)
through the PDU mounting brackets (B) and into
secure mounting points on the mounting surface.
2
Attach the input plug of the PDU to a grounded outlet. Insert the plug directly into a
grounded outlet that does not share a circuit with a heavy electrical load (such as an air
conditioner or refrigerator).
Note: Select models include an input plug adapter that converts the twist-lock input plug
to a straight-blade input plug. Attach the input plug adapter to the input plug if you wish
to plug the PDU into a compatible straight-blade outlet.
3 Attach equipment to the PDU. Do not exceed the load rating of the PDU. The total
electrical current used by the PDU will be displayed on the digital meter in amperes.
21-03-395-93-3045.indd 2 21-03-395-93-3045.indd 2
1-1
B
1-2
B
1-3
C
1-4
2
3
2
B
A
A
C
A
C
B
C
A
4/1/2021 11:34:54 AM 4/1/2021 11:34:54 AM