Kebo FLS120M Manuel Utilisateur page 26

3. OPERATION
• ON / ON / OFF / OFF / SPEED / SPEED: Plug the device into the socket. Turn
the "speed / speed button at position 1 (slow), 2 (medium), 3 (fast). The device
has three speeds, the speed can be adjusted according to your needs.
When "0", it will be disabled.
• SWING / SLEWING press the swing button, the wind will blow automatically
swiveling from side to side. Cancel this function by pressing the "swing" button.
To leave the air vent from blowing up or down gently position the blades of the
grille downwards or upwards in the desired direction with the black levers
between the grilles on the right side.
• COOL / COOL / humidify / HUMIDIFYING: Press the 'cool' key for cooling.
Cancel this function by pressing the "cool" button.
THE USE OF A COOLING ELEMENT
The cooling element has a particular characteristic, it can absorb heat and keeps
the water temperature is lower than the ambient temperature.
Use:
a. Fill to MAX. (NOT overfill!) Place the cooling element in the freezer to ensure
that it freezes completely (put at least 24 hours in a freezer).
b. Unlock the water tank, pull the tank forward and place a cooling element in the
water tank. Push the water tank back into the unit and lock it.
c. There are two ice packs supplied for continuous use.