Kebo FLS120M Manuel Utilisateur page 25

2. ASSEMBLING AND WATERING
1. Fit the castors: turn the device around and lay on a flat surface and fit the
castors.
Pay attention: The rear wheel is with brake, but the front wheel is without brake
(image: map 1)
2. Add water: Unlock the water tank at the back, pull the water tank, fill the tank
with water, push the water tank back into the unit and lock the tank
(image: map 2)
Pay attention:
A. During filling keep the fill level indicator closely watched (image: map 3)
b. The level of the water tank should never be filled more than "MAX" level (do
not overfill).
If the humidification function is used the water level in the tank must never be
below "MIN".
c. Put ice or a cooling element in the water tank for efficient cooling. But the total
filled level of the tank may never be more than "MAX".