Assembling The Stand; Installing The Printer - Canon imagePROGRAF TM-305 Guide D'installation

Assembling the Stand

∙ When using the stand
-> Assemble the stand on which you will install the printer by referring to the
∙ When not using the stand

"Installing the Printer"

-> Proceed to
Installing the Printer
1
Remove the packaging material.
3
Have 3 people lift up the printer. Have 1 person grasp the carrying handles at the bottom of each side, and 1 person grasp the handles in the middle
of the rear side.
• Moving the printer requires at least 3 people, holding it on the left, right,
and rear sides. Be careful to avoid back strain and other injuries due to
Caution
the weight of the printer.
<Printer weight (printer only)>
∙ TM-305: Approx. 108 lb (49 kg)
∙ TM-300: Approx. 106 lb (48 kg)
∙ TM-205: Approx. 91 lb (41 kg)
∙ TM-200: Approx. 91 lb (41 kg)
.
Printer Stand Setup Guide (separate manual)
2
Remove all of the tape and other packaging material.
Remove the tape affixed to the roll holder.
• When moving the printer, firmly grasp the carrying handles (A) under
each side and at the rear side. Holding the printer at other positions is
dangerous and cause injury and damage if the printer is dropped.
3
.
A
A
A