Publicité
Les langues disponibles
Les langues disponibles
5. INSTALLATION AND USE
5.1 Use
MANUAL
COMMISSIONING
The device must be completely removed from its packaging. All guards must be completely removed.
Place the device on a solid, flat surface Never place the device on a flammable surface.
Do not install this device near open fires or other heating devices.
Freeze the eutectic plate in a freezer (-4°C or less) for approximately 3 to 6 hours before each use. (The
plate stays cold for about 4 to 6 hours at an ambient temperature of about 25°C).
6. CLEANING AND MAINTENANCE
6.1 Daily maintenance
Clean the device with warm water and a clean cloth after each use.
After cleaning, use a soft, dry cloth to polish and dry the device. All parts must be dried.
Store the device in a dry place.
REMARK
Waste from used devices: all used devices must, when disposed of, comply with the regulations in force in
their country*. It is imperative to make the device unusable before disposal by removing the power supply
cable.
* in terms of ecology and recycling
EN
Publicité
