Pioneer SC-2024-K Guide Rapide page 4

Launching the built-in AVNavigator
Operate AVNavigator by following the screen prompts of your
computer, etc.
Operating environment
AVNavigator can be used in the following environments.
– Windows PC: Microsoft ® Windows
Windows ® 7/Windows ® 8/Windows
– Mac: Mac OSX (10.7, 10.8 or 10.9)
– iPad/iPhone/iPod touch: iOS 7
– Android device: Android 4.0.4, 4.1.1, 4.1.2, 4.2, 4.2.2, 4.4.2
Some AVNavigator functions use an Internet browser. The
following browsers are supported:
– Windows PC: Internet Explorer
– Mac/iPad/iPhone/iPod touch: Safari 6.0
– Android device: Android browser
Depending on the computer network setting or security
setting, AVNavigator may not operate.
Using Windows PC
1
Start up Internet Explorer on your PC (open
any random Internet page).
2
Press STATUS on the remote control and check
the front panel display on the receiver (the IP
address of the receiver will appear).
(Example Text Display)
If 0.0.0.0 or 169.254.112.202 appears in the address, it indicates
that the receiver is not connected to the network. Check to
make sure that the receiver and router are properly connected.
3
Enter number in 2 above in the field in
Internet Explorer shown below and then press
the ENTER key.
(Example Input Format) 192.168.0.124
4
With a Windows PC other than Windows XP, you can use
the following method to launch AVNavigator.
Launch Explorer and then right-click <SC-2024> or <SC-
1224> displayed in the 'Network' folder, then click 'View
device webpage'.
® XP/Windows Vista ® /
® 8.1
Using Mac
® 8, 9, 10, 11
Launch Safari and click <SC-2024> or <SC-1224> displayed
in 'Bonjour' on the Bookmarks bar.
If 'Bonjour' is not displayed, tick the 'Include Bonjour in
the Favorites bar' check box on the 'Advanced' tab in
the Safari 'Preferences...' menu.
Using Built-in AVNavigator (continued)
Using iPad/iPhone/iPod touch
Download a free application, iControlAV5, from the App Store.
After launching iControlAV5, follow the instructions on the
screen. After that, on the Home screen, press 'AVNavigator'
or the icon.
iPad
iPhone/iPod touch