Publicité
3.
From underneath the sink, install the mounting hardware onto the valve
shank. Use the phillips screwdriver for final tightening after the body is
aligned.
Sous l'évier, installer le matériel de fixation sur la tige de robinet. Employer
un tournevis Phillips pour effectuer le serrage final lorsque le corps est
bien placé.
Instale las piezas de montaje en el vástago de la válvula por la parte de
abajo del fregadero. Utilice un destornillador phillips para apretar al final,
una vez que esté alineado el cuerpo.
4.
Remove the plastic seal cover from the outlet port prior to pushing the
hose adapter onto the same port.
Enlever le capuchon de plastique sur l'orifice de sortie avant de pousser
en place l'adaptateur du tuyau.
Quite la cubierta obturadora de plástico de la conexión de salida antes de
presionar el adaptador de manguera contra la misma conexión.
5.
Install the quick connect hose assembly by following these simple steps:
A. Push the quick connect housing firmly upwards onto the outlet hose
until a 'click ' is heard.
B. Pull down on the quick connect housing. If you cannot pull housing
off, the quick connect is secure.
For future reference (C): Push up housing tight to clip. While holding
assembly together, pull down the complete assembly to release from
outlet hose.
Note: Please make sure the spray hose does not interwork with other
pipes.
Maintenance
Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically
with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty.
Warranty Registration:
Please log on to gerber-us.com to register your product today.
Rubber Washer/
Arandela de goma/
Rondelle étanche
Lock Nut/
Contratuerca/
Écrou de blocage
Plastic Seal Cover
Aapuchon de plastique
Cubierta obturadora de plástico
Metal Washer/
Arandela de metal/
Rondelle en métal
3
4
5
Publicité
