Canadian Tire Sutton Série Guide De Montage page 4

Place the Fabric Base Top Cover (L) over the base.
Place the hook on the Side Panel (K) to make sure the
Fabric Base Top Cover (L) is attached properly for easy
locking. Then lock the hook on four side panel (K).
L
K
Put Sheet Metal (H) and Tube Rim (G) on top of Base
Tube (C), then screw in the Screw-in Knob (F) .
(1) Insert the stem of Sunshade (I) into the Base Tube
(C) on the assembled base. (2) Turn the Screw-in Knob
(F) until it is tighten thoroughly. (3) Open the lock handle
(4) then push lock handle up.
L
F
(1) Close the lock handle; (2) push the crank up. (3) Pull
down the plastic collar to lock the sunshade.
Turn the crank clockwise to open the umbrella.
I
C