Introduction; Insert The Batteries; Function Of The Remote's Buttons - Master Take Control Basic Ur81 Guide Utilisateur

1. Introduction

The Take Control Basic is designed to control up to 8
devices:
TV, VCR, CBL (decoder, set top box), DVD, CD, ASAT
(analogue satellite receiver), DSAT (digital satellite receiver)
or any other device under AUX mode key. The Take Control
Basic contains a library of codes that are preprogrammed
into the remote control. This library covers nearly all the
audio video products on the market today. The codes have
to be programmed once before use. This can be done in
different ways:
a. Manual entry of one of the codes displayed under the
related brand and type of equipment in the attached code
book (see 4.1)
b. Automatic code search for some well-known brands (4.2)
c. Automatic code search for all brands (4.3)
d. Manual search through all codes (4.4)
2. Insert the batteries (always use NEW AAA alkaline
batteries).
1. Open the cover on the back of the Take Control Basic
Remote.
2. Insert 2 AAA alkaline batteries, verify that they are placed
correctly with the + on the battery in the same position as
marked inside the battery compartment.
3. Close the battery compartment carefully.

3. Function of the remote's buttons

[1] I POWER (On/Off)
Allows you to switch off the last selected appliance. Some
appliances can also be switched on with this button.
[2] LED indicator
The indicator light flashes when the remote is operating or
lights continuously while you are programming the remote.
[3] TV, VCR, CBL, DVD, CD, DVR, SAT, AUX
These keys allow you to select the appliance you wish to
control.
[4]  MUTE
Allows you to turn on/off the sound. You can control the
"Mute" function of your TV even when you are in VCR, DVD
or SAT mode. No need to select the TV mode.
[5] CHAN +/- or PROG +/-
Select the next or the previous channel of your TV or SAT.
In DVD mode: next or previous chapter.
[6] VOLUME +/-
Allows you to control the volume. You can control the
volume of your TV even when you are in VCR, DVD or SAT
mode. No need to select the TV mode.
[7] INFO
Displays on screen information of the selected appliance
(when available).
[8] SETUP
Allows you to program your remote before the first use. It
also allows you to access to secondary functions of certain
P/N 033000=XXXXX 7 Rev.01-06-06