Télécharger Imprimer la page

Inventum VR1430B Manuel D'utilisation page 25

Publicité

Les langues disponibles

Les langues disponibles

4
use
Check that the voltage corresponds with the voltage stated on the information plate and insert the plug in the socket. The
control unit of the freezer is on top of the appliance.
Adjusting the temperature
By means of the thermostat you are able to change the temperature in the freezer. The thermostat has five possible
positions: -14 °C, -16 °C, -18 °C, -20 °C and -22 °C.
Press the 'Set' button to confirm the setting. Each time you press 'Set', the setting jumps to the next temperature. After ± 60
seconds, the LED will extinguish, but the set temperature remains active.
We recommend setting the appliance to -18 °C.
The appliance will now cool continuously until the set temperature has been reached. Allow the appliance to reach the set
temperature, before filling it with food. Usually this will take 2 to 3 hours.
Super freeze position
Hold down the 'Set' button for 3 seconds to switch to the super freeze position. The indicator led at 'Super' will light up.
Hold down the 'Set' button for another 3 seconds to switch off the super freeze position.
Attention:
The ambient temperature, the frequency of opening the door and the position of the appliance have an effect on the
temperature in the appliance. Take this into account when setting the thermostat.
• Do not place hot food in the appliance.
• You should never place hazardous, highly flammable or explosive substances such as alcohol, acetone or petrol in the
appliance, because there will be a hazard of explosion.
• Carefully package meat and fish to prevent unpleasant smells.
• Do not place food against the rear wall of the appliance.
• Leave sufficient space between the different foods, to allow the air to circulate properly.
• Do not leave the door open for longer than necessary.
Open door alarm
If the door is open for more than 90 seconds, the open door alarm will sound. Close the door or press the 'Set' button to
switch off the open door alarm.
High temperature alarm
If an internal temperature that is too high is detected, a high temperature alarm will be triggered. All five LED lights on the
thermostat will flash. The alarm can be cancelled by pressing the 'Set' key.
25
English

Publicité

loading