Publicité
PH2030
10 MHz to 18 GHz
50Ω
N(M)
PH2033
10 MHz to 18 GHz
50Ω
N(M)
Notes for Power Heads:
1.
Thermocouple Pulse Characteristics at 25°C: Maximum pulse energy = 30 w-µsec. (per pulse).
2.
Thermocouple Pulse Characteristics at 25°C: Maximum pulse energy = 300 w-µsec. (per pulse).
3.
After 2-hour warm up: High frequency power linearity uncertainty: (worst case) PH2000A, PH2001A, and PH2004A (0.005 x f) dB per dB above
+4dBm; (above +14dBm for the PH2007A), where f is in GHz.
4.
Power Linearity Uncertainty at 50MHz:
<20dBm: 1% for PH2000A, PH2001A, PH2004A, and PH2007A Heads after performing AutoCal
20 to 30dBm: 1% increasing linearly to 6% for PH2007A Heads after performing AutoCal
<10dBm: 1% for PH2030, PH2009, PH2010 and PH2005 Heads.
10 to 17dBm: 3% for PH2009, PH2010 and PH2005 Heads.
17 to 20dBm: 6% for pH2009, PH2010 and PH2005 Heads.
5.
Temperature Influence:
a. 0 to 25°C: 0.02 dB/°C; 25 to 50°C: 0.01 dB/°C for PH2001A, PH2004A, PH2007A, and PH2005 Heads.
b. 0 to 50°C: 0.03 dB/°C for PH2009, PH2010 Heads.
c. 0 to 50°C: 0.01 dB/°C for PH2030, and PH2033 Heads.
Part No.
10017970
5ft. Power Head Cable*
10017971
10ft. Power Head Cable*
10017972
20ft. Power Head Cable*
10017973
50ft. Power Head Cable*
10017974
100ft. Power Head Cable*
10016003
Power Head Cable Interconnection Adapter (F/F)
10013186
FT3000 Bulkhead Feedthrough Connector (F/F)
10008829
RM2000 Rackmounting Kit
10008941
Data Adapter, for Power Head
* All power head cables are shipped complete with a blank data adapter. Data from the PH to be used must be loaded onto the new
adapter (See Operation Manual for details).
THERMOCOUPLE HEADS
-20 to +20 dBm
15 W
300 mW
Note 1
0 to +37 dBm
150 W
10 W
Note 2
MODEL PH2000/PM2003 ACCESSORIES
10 MHz to 30 MHz
1.25
30 MHz to 16 GHz
1.18
16 GHz to 18 GHz
1.28
10 MHz to 2 GHz
1.10
2 GHz to 12.4 GHz
1.18
12.4 GHz to 18 GHz
1.28
200 nW
100 nW
200 nW
20 µW
10 µW
20 µW
Page 2 of 2
PM2002
PM2003
PM2002
PM2003
Publicité
