Duronic KS6000 BK/CR Manuel D'utilisation page 7

The tare function is also useful for weighing different ingredients into the
measuring bowl as you go along, for instance once you've added the first
ingredient to weigh, press the "ON/TARE" button and the scale will return to
zero "0", which allows you then weight the next ingredient accurately.
Automatic Switch Off
The scale will automatically switch off after 60 seconds of no use.
Manual Switch Off
You can manually switch the scale off at any time by pressing and holding the
" " button for 2 seconds.
ON/TARE
When using this scale, please ensure it is used on a dry, flat even surface.
The scale is not waterproof, therefore should not be exposed to moisture or
submerged under water.
To clean the scale, use a slightly damp cloth to wipe over it. Do not use any
chemical or abrasive cleaning products to clean the scale.
If you plan to not use the scale for a long time, remove the batteries before
storing away.
Low battery
This symbol gives advance warning
that the battery will run out soon.
No battery power remaining
This means it's time to change the
batteries.
Unstable weight
This is shown when weight is not
stablised or the scale is not on an
even surface.
Overload
This means that the maximum
weight limit has been exceeded.
Remove some ingredients to prevent
damaging the scale.
Cleaning and Care
7