audiophony MOJO CURVE XL Guide De L'utilisateur page 18

English
6 - Connections
Please make sure to properly configure the sound levels of your system. In addition to being unpleasant for
the audience, improper settings can damage your whole sound system.
The "LIMIT" indicators will light on when the maximum level is reached and must never be permanently lit.
CAUTION
Beyond this maximul level, the volume will not increase but will be distorted.
Moreover, your system can be destroyed by an excessive sound level despite of the internal electronic protections.
First, in order to prevent that, adjust the sound level via the Level of each channel.
Then, use the High/Low equalizer to adjust the acoustic as you wish and then the Master level.
If the sound output does not seem powerful enough, we strongly recommend to multiply the number of systems in
order to spread the sound output evenly.
Page 18
MOJOcurveXL - Active curve array system with mixer, BT and DSP
CH1 : LINE
CH 1 CH 2
CH2 : MIC
CH3
CH 3 CH 4/5
CH4/5 : Bluetooth
®