ExPelec Nicols BSW 200 LED Manuel D'utilisation page 16

Manuel d'utilisation
4 – Operation instruction
• DMX address setting
With this function, you can adjust the desired DMX-address via the control board. Select via the encoder.
Press it and adjust the DMX address by turning the encoder. Press the encoder to confirm.
Press the mode/Esc-button in order to return to the main menu. Set DMX address
Display the DMX 512 value of each channel. With this function you can display the DMX 512 value of
each channel. The display automatically shows the channel with a value changing
• Run mode
The LED moving head have 6CH and 18CH and can receive the international DMX signal.
In the RUN mode, you can chose MASTER, SOUND CONTROL, MASTER AUTO RUN, MASTER SOUND
CONTROL and SLAVE mode
• Réglage du langage
With this function, you can choose the language between English and Chinese.
• PAN/TILT reverse
Pan reverse : With this function you can reverse the Pan movement
Tilt reverse : with this function you can reverse the Tilt 1 movement
Display reverse : with this function you can reverse the Tilt 2 movement
• RESET
With this function, you can reset the devise via the control board. You can select the different reset
function by turning the encoder
• Factory reset
With this function, you can select restore factory set for ON or OFF, the default is OFF.
• System info
With this function, you can know the On Time, Accumulative Time, Current Run Mode, Temperature and
Software version
• Manual Control
With this function, you can adjust the pan and tilt and the move speed, also adjust the dimmer, strobe
and color
BSW 200 LED
16