ExPelec Nicols BSW 200 LED Manuel D'utilisation page 13

User manual
1.4 INSTALLATION
The unit should be mounted by its screws holes on the bracket. Always ensure that th eunit is frimly fixed
to avoid vibration and slipping while operating. The strcture to which you are attaching the unit should
be able to support 10 times the weight of the unit. Also always use a safety cable than can hold 12 times
the weight of the unti when installing the fixture. The quipment must be fixed by professionals.
2. TECHNICAL SPECIFICATIONS
Beam spot wash moving head with 200W LED
* Light source : 1 x 200W white LED
* Lumens : 40 000 Lux@1m
* Beam angle : 12° - 22°
* Dimmer : 0-100%
* Strobe : 0 -20 Hz
* Sound level : <29 dBA@1m mini
* DMX Channels : 6/18
*Operation Mode : Auto, DMX, Master/Slave
* 7 colors wheel
* 7 fixed gobos wheel + Open
* 7 rotative gobos wheel + Open
* Pan 540° / Tilt 270°
* Prisms : 1 x rotation 6 prisms + 1 x rotation 5 prisms
* LCD display
* Power consumption : 235W Max
* Voltage : AC110-240V, 50/60 Hz
* Dimensions : 313x447x183mm
* Net weight : 12,5 Kg
BSW 200 LED
13