Kenwood KMM-BT522HD Mode D'emploi page 23

BLUETOOTH®
Auto Pairing
When you connect iPhone/iPod touch/Android
device to the USB input terminal, pairing request (via
Bluetooth) is automatically activated.
Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is
turned on.
– [AUTO PAIRING] is set to [ON]. ( 22)
– KENWOOD MUSIC PLAY application is installed
on the Android device ( 9) and [BROWSE MODE] is
selected. ( 10)
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• /
color and flashes.
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 20)
During a call:
• /
according to the settings made for [DISPLAY] ( 29) and ZONE 2 illuminates in green color.
• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
The following operations may differ or not available depending on the connected phone.
To
First incoming call...
Answer a call
Reject a call
End a call
/ /
/ /
On the faceplate
Press or the volume knob
or one of the number buttons
(1 to 6).
Press .
Press .
: ZONE 2 illuminates in green
: ZONE 1 illuminates
On the remote control
Press .
Press .
Press .
19
ENGLISH