Publicité
Les langues disponibles
Les langues disponibles
!
WARNING continued :
- DO NOT USE CANNED AIR ON SHREDDER.
- RISK OF FIRE. Never use any petroleum based or flammable oils or lubricants in or around the
machine as some oils can combust causing serious injury.
- NEVER dispose of flammable chemicals or materials that have come into contact
with flammable chemicals (for example, nail polish, acetone, gasoline) in the shredder basket.
- Never shred plastic (except credit cards), any hard materials, continuous forms,
newsprint, or anything with adhesives including labels and envelopes.
- A socket-outlet should be near the equipment and be easily accessible.
- Always turn the shredder off and unplug the power cord from the AC outlet before cleaning it,
moving it, or emptying the waste basket.
- Never let the wastebasket become full. This will lead to shredded material being pulled back up into
the shredder and cause jams.
- Never place the shredder near water or any heat source.
- Keep wastebasket emptied so that the shredder output is not impeded.
- Do not use the shredder if the power cord is damaged in any way.
- Do not attempt to service this product yourself as doing so may expose you to sharp cutting blades
and/or electricity and will void the manufacturers warranty.
- Never try to clean or clear the shredder blade.
TROUBLESHOOTING PAPER SHREDDERS :
The shredder does not work at all.
a) Make sure the unit is plugged in and that the outlet it is plugged into is in good working order.
b) In the event that the shredder is run continuously for too long and the motor overheats, a thermal
overload switch will automatically shut the power off. If this happens, move the switch to the off
position for 30 minutes or more before continuing.
The shredder runs in "Rev" mode but not in "Auto" mode.
a) While in "Auto" mode, the motor will not start running until paper is inserted into the
feed slot. Set the unit to "Auto" and insert paper to be shredded. It is normal for the motor to run for
a moment after setting it to "Auto" but it should stop until paper is inserted. The trigger that activates the
shredder in Auto mode is located directly in the center of the slot. If the paper you are inserting is narrow,
it may not be hitting the switch. It is possible that the trigger, which activates the shredder, has become
blocked with paper. Insert an index card, directly in the center of the feed slot, and apply force. This
will usually clear any paper blocking the switch and force the switch closed.
6
LIMITED PRODUCT WARRANTY :
Aurora warrants the cutting cylinders of the machine against defects of workmanship and material for a
period of 3 years from the original purchase date to the original consumer. Aurora warrants all other
parts of the machine against defects of workmanship and material for a period of 1 year from the
original purchase date to the original consumer.
Should there be a defect or malfunction of this product, Aurora will replace the product free of charge.
Customer is responsible for all shipping charges to return the defective product to Aurora. A copy of the
proof of purchase showing original purchase date is required. This warranty is void if the
product has been subject to damage, unreasonable use, improper service, or other causes not arising
from defects in original material or workmanship. This warranty is void if factory seal is broken or
removed from the product. This warranty does not include adjustments, parts or repairs required by
circumstances beyond the control of Aurora.
There are no expressed warranties other than those stated herein.
Any expressed or implied warranties, including but not limited to merchantability and fitness for a
particular purpose are limited to the above warranty period. Aurora shall not be liable for any
incidental or consequential cost, expenses or damages resulting from any failure defect or malfunction
of this product.
Some states do not allow the exclusion of limitations of implied warranties or consequintial damages,
therefore, the above limitations may not apply to you.
This warranty grants you specific legal rights, and you may also have other rights that vary from
state to state.
Please contact us with any questions.
Aurora Corp. of America
3500 Challenger Street, Torrance, California 90503 USA
1 - 800 - 327 - 8508 USA ONLY • 310 - 793 - 5650 INTERNATIONAL • info
auroracorp.com
@
7
Publicité
