Publicité
Les langues disponibles
Les langues disponibles
disassemBLe Light Fixture
1. Remove two decorative nuts from light fixture
cover.
2. Remove cover from base.
3. Remove two decorative nuts from fixture screws
in universal mounting bracket.
4. Remove universal mounting bracket from
base.
Decorative Nut
IT Y
IT IV
N S
S E
- H
- M
L O
1 0
5
1
E
- T IM
S T
T E
O N
Light Fixture Base
Light Fixture Cover
Decorative Nut
Universal
Mounting
Bracket
I
M IN
instaLL universaL mOunting
For best performance, mount the fixture at least 8
feet (2.4 m) above the ground.
warning: turn power off at circuit
breaker or fuse.
1. Tighten the two fixture screws finger tight.
2. Attach universal mounting bracket to junction
box securely with the two screws provided.
wiring Light Fixture
1. Connect the junction box wires and the fixture
wires together as shown in the following dia-
grams.
cautiOn: dO nOt remove wire connec-
tor from red wire or connect the red wire
unless you want to control other lights from
this motion sensor fixture.
2. Twist and secure wires with wire nuts.
Note: If you have a metal junction box use the recom-
mended grounding method shown in the following
illustration.If you are uncertain about the grounding
method, consult your local building code.
2
Bracket
Junction Box
Universal Mounting
Bracket
Junction Box Screw
Fixture Screw (Tightened
Finger Tight)
598-1184-05
Publicité
