LEXIBOOK HPBT010 Serie Mode D'emploi page 9

WIRELESS FUNCTION (BLUETOOTH®)
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Lexibook® is under license.
Other trademarks and trade names are those of their respective owners.
© 2020 Bluetooth SIG, Inc.
Your audio player must support the A2DP Bluetooth® profile to match these
headphones. Please refer to your audio player's instruction manual for
accurate information about the Bluetooth® profiles it supports, and how to set
up Bluetooth® pairing.
1. Activate the Bluetooth® function on your personal device (smartphone,
MP3 player, etc.). Please refer to your device's instruction manual on how to
activate this function.
2. Press and hold the Bluetooth® on/off button until you hear a signal tone to
activate the auto-detection of a nearby device. The LED blinks red and blue to
indicate the device is ready to be paired.
3. Confirm pairing or select the Bluetooth® name "HPBT010" in the list of
available devices to connect your player to the headphones.
4. If pairing is successful, a "Beep" sound will come out from the headphones
and the LED will flash in blue only. You can enjoy music via the Bluetooth®
device now.
5. To stop the connection with the headphones, deactivate the Bluetooth®
function on your personal device or on your headphones.
Notes:
• When turned on, the headphones automatically search for a device that has
previously synchronized with.
• If your Bluetooth® device requires a password, the default password is 0000.
9
HPBT010seriesIM2260_V03.indb 9 22/6/20 11:49 am