Télécharger Imprimer la page

LEXIBOOK HPBT010 Serie Mode D'emploi page 8

Masquer les pouces Voir aussi pour HPBT010 Serie:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
When unpacking, ensure that the following elements are included:
1 x 2-in-1 Bluetooth® Headphones / 1 x Micro USB charging cable / 1 x
3.5mm audio cable / 1 x Instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties
and tags are not part of this product and should be discarded.
Refer to the diagram p.2:
1. Bluetooth® on/off
2. Aux In jack
3. Play / pause
The Bluetooth® headphones operates with the micro USB charging cable
(included) or with a USB type adaptor (not included) 5V
Power supply
1. Make sure the Bluetooth® is turned off before
charging your headphones.
2. Insert the small end of the micro USB cable
(included) into the micro USB charging port.
3. Connect the other end of the micro USB cable into
the USB port of your powered computer or USB type
power adaptor and plug it into a wall socket. The LED
next to the Bluetooth® on/off button lights up in red
when the headphones are charging.
4. The LED indicator turns off when charging is complete.
Note: Please note that the micro USB cable can be used for battery charging
only and not for data transfer.
Continue to enjoy listening to music with the Aux In cable when charging the
device.
Note: After approximately 5 minutes of inactivity, the Bluetooth® headphones
powers off automatically.
WARNING: Significant electromagnetic interference or electrostatic
discharges may cause the device to malfunction or lose data. If the device is
not functioning correctly, switch it off and then on again, or unplug the USB
cable.
WARNING:
• Risk of explosion if battery is incorrectly replaced. Please only replace it with
a same or an equivalent battery. (For Service instructions only; battery is not
intended to be replaced by the user).
• The battery should not be exposed to high temperatures, such as sunlight,
fire or anything similar.
• Keep a minimum distance around the device for sufficient ventilation;
• the ventilation should not be impeded by covering the ventilation openings
with items, such as newspapers, table-cloths, curtains, etc.;
• no naked flame sources, such as lighted candles, should be placed on the
apparatus;
• the use of apparatus in tropical and/or moderate climates.
• Batteries should be disposed properly. Take them to the collection container
in order to protect the environment;
HPBT010seriesIM2260_V03.indb 8
UNPACKING THE DEVICE
LOCATION OF CONTROLS
CHARGING THE DEVICE
8
4. Next track / increase volume
5. Previous track / decrease volume
1A.
22/6/20 11:49 am

Publicité

loading