Front And Rear Shock Absorber Adjustment - Yamaha Ultramatic Grizzly 660 2001 Manuel Du Propriétaire

1. Spring preload adjusting ring
1. Anneau de réglage de la précontrainte de ressort
1. Anillo de ajuste de la precarga del resorte

Front and rear shock absorber adjustment

The spring preload can be adjusted to suit the rid-
er's weight and riding conditions.
NOTE:
_
When adjusting the rear shock absorbers, the rear
wheels need to be removed. (See page 8-115 for
removal and installation procedures.)
_
Adjust the spring preload as follows.
To increase the spring preload, turn the adjusting
ring in direction a.
To decrease the spring preload, turn the adjusting
ring in direction b.
NOTE:
_
A special wrench can be obtained at a Yamaha
dealer to make this adjustment.
_
Standard position: B
A - Minimum (soft)
E - Maximum (hard)
4-49
EBU01312