Exquisit BD3102web Mode D'emploi page 15

 Set the temperature dial for the desired fabric. Always check the label of the garment
before choosing the temperature setting.
 Set the iron on its heel rest and wait until the temperature indicator light goes out.
STEAM PRESSING
Kind of textile
Nylon
Synthetic (e.g. acetate,
acrylic, viscose, polyamide,
polyester, ...)
Silk
Wool
Cotton
Linen
Care and cleaning
 Fill the water tank (variable steam dial on
 Put the plug of the appliance into the power socket.
 Choose the desired temperature.
 Turn the variable steam dial between
steam.
 Set the iron on its heel and wait until the temperature indicator goes out.
Caution: Set the temperature dial within the steam range ('
setting is too low, water may drip from the soleplate.
Check the garment label before ironing because some clothes may be damaged when
exposed to steam or water.
SPRAY
 Produces a mist for removing stubborn creases.
 Spray can be used at any temperature setting and during either dry or steam pressing.
Press down the spray button to spray.
BURST OF STEAM
The burst of steam feature
This button also allows you to iron delicate articles of clothing vertically. This feature is called
"vertical burst of steam". To do so, hang your article of clothing on a hanger, keep the steam
button pressed and pass the iron to and fro in front of the article of clothing, making sure that
the soleplate does not come into contact with the article of clothing. The distance between
the soleplate and the article of clothing depends on the kind of textile and the creases.
Temperature dial
MIN/OFF
|
|
|
|
|
|
MAX
|
|
position).
and
provides additional steam for removing stubborn creases.
15
Steam ironing
according to the desired amount of
' or ' '). If the temperature