Publicité
Les langues disponibles
Les langues disponibles
operAtion - Accessories
bent nozzle
For cleaning in corners and difficult places, such as smaller spaces as toilets and wash basins
round brushes
For cleaning very dirty areas or uneven hard surfaces, for example such as pointing, the cooker etc.
extension hose
For extending your working area and for cleaning in corners and difficult places
nozzle
Standard tool that in almost all cases should be used.
Window wash tool + cloth
For cleaning of furniture, fabrics, textiles, etc.
Window wash tool + Wiper
For cleaning large glass surfaces such as window panels and mirrors.
Warm up glass panels in winter by pre-steaming at a distance of 30 cm with a little steam before starting
to clean.
operAtion - steam cleaning
1. Fill the water tank with water (see 'Filling the tank with water').
2. Fit the appropriate accessory (see 'Fitting the accessories').
3. Put the plug into the wall socket
4. The appliance will heat up (± 10 minutes), the indicator light (6) illuminates.
5. The appliance is ready for use once the light extinguishes.
6. During cleaning the steam control light illuminates and extinguishes variable. This is normal because the
appliance frequently heats up automatically in the meantime.
7. Press the steam button (3). Steam will escape as long as the steam button is pressed down. Just release
the steam button to stop.
8. Move the appliance backwards and forwards over the object to clean it. For optimum results keep the
cloud of steam close to the surface; this will offer the steam most chance to penetrate the dirt.
9. When you have finished, put the appliance down where the steam will not contact any surfaces and allow
the last steam to escape.
10. Remove the plug from the wall socket and allow the appliance to cool down completely.
operAtion - refilling the water tank
When the appliance stops steaming, the water tank may be empty. Now proceed as follows:
1. Remove the plug from the wall socket and let the appliance cool down for at least 5 minutes.
2. Press the steam button and discharge the remaining steam.
3. Unscrew the pressure cap and fill with fresh water (max. 220ml).
If you have been working with the appliance up to now, the water tank will still be hot. In this case slowly
and carefully fill with water. The water could splash out of the tank.
4. Fasten the pressure cap by turning it clockwise.
5. Put the plug into the wall socket. The appliance will heat up (± 10 minutes), the indication light illuminates.
6. The appliance is ready for use once the light extinguishes.
cleAning And MAintenAnce - cleaning
1. Remove the plug from the wall socket.
2. Allow the appliance to cool down completely.
3. Clean the exterior of the appliance and the accessories with a damp cloth and a little washing-up liquid.
4. Clean the cleaning cloth in a washing machine ('Cottons' program, 40 °C.)
5. Store the handheld steam cleaner.
Never immerse the appliance, plug or power cord in water. Never use corrosive or scouring cleaning
agents or sharp objects (such as knives or hard brushes) to clean the appliance.
20
instruction manual
Publicité
