Publicité
Les langues disponibles
Les langues disponibles
appliance malfunctions or it has been damaged in any
manner, return to the customer service department for
repair, because special purpose tools are required.
• Avoid spillage on the connector.
• Heating element surface is subject to residual heat
after use.
• Use the kettle according to this instruction, any misuse
may cause electric shock or other hazards.
• This appliance is not intended to heating liquid other
than water.
• Regarding how to clean the surfaces in contact food,
please refer to section <Cleaning >.
• Before you connect the kettle to the mains supply,
make sure that the voltage indicated on the rating
plate, located on the bottom of the water kettle
matches the mains voltage in your home. If it does
not, contact your dealer and do not use the kettle.
• The kettle will switch off automatically when the water
has boiled. If you want to stop the heating process
before the kettle automatically switches off, press the
ON/OFF switch up.
• After the kettle has switched off automatically (or has
been switched off manually) it may need time to cool
down. After 15-20 seconds, the kettle can be switched
on again.
• Always fill the kettle with water before switching it on.
• The kettle is designed to disconnect the live electrical
supply from the element abnormal operating
conditions. If the water kettle is accidentally switched
on without water, the boil dry protector will operate.
• If the kettle ever boils dry, the power indicator will go
out. Allow 15 minutes to cool before refilling with cold
GB-3
Publicité
