Publicité
Les langues disponibles
Les langues disponibles
Warning: To avoid a risk of scald, make sure the
steam generator has been cooled down
completely before removing the knob.
4. After drainage, tighten the knob and make the unit
base be placed upright again.
5. When do not use the appliance for a long time,
empty the water in the tank, and put the iron on the
thermal insulation stand and then press the iron lock
"
" to lock the iron well.
Note: The whole steam station iron can be lifted up
by grasping the iron' s handle after the iron being
properly locked on the thermal insulation stand.
6. Follow the operation as below to store the steam
supply hose and power cord : firstly, fold
the steam supply hose in two and wind it along the
cord winding groove, and then fix it at
the cord winding groove. In addition, tie the power
cord with a cable tie (see Fig.5).
Fig.5
IRONING TIPS
- Always check first whether a label with ironing
instructions is attached to the article. Follow these
ironing instructions in any case.
- The iron heats up quicker than cooling it down,
28
EN
Publicité
