Care And Maintenance; Troubleshouting; Guarantee Conditions - LAZER LiNK Manuel D'utilisation

CARe AND mAINTeNANCe

Lazer Link uses the latest technology and is manufactured
to the highest quality standards. Observing the following
recommendations will ensure that Lazer Link is not
inadvertently damaged.
- Do not try to open any of the system components, as the
electronic parts inside may be damaged. Additionally,
trying to open or modify the battery is dangerous.
- Keep your Lazer Link out of reach of children.
- Keep your Lazer Link in a dry place. Steam and humidity
may damage the electronic circuits.
- Avoid extreme heat or cold. Extreme cold may cause
condensation inside the components when re-warmed.
Extreme heat may damage the battery, circuits or casings.
- Do not drop, hit or twist the components, as the circuits
inside may be damaged.
- Do not paint or decorate the Lazer Link, as it may damage
the casing or prevent the intercom from functioning
correctly.
- Do not use chemicals, solvents or detergents to clean the
Lazer Link as it may damage the casing.

TROUBLeSHOUTING

If you cannot connect the Lazer Link to your mobile phone,
please check the following:
MEG Lazer Link bichro 135 X 80 mm DEF.indd 9
- Check that your Lazer Link is switched on.
- Check that your mobile phone is switched on and has the
Bluetooth ® Function activated.
- Check that both devices are associated
- Check that the Lazer Link and the mobile phone are in a
range of less than 10 meters from one another.

GUARANTee CONDITIONS

This guarantee is only valid upon presentation of the original
purchase invoice issued by the seller to the original purchaser,
and showing the date of purchase. This documentation must
accompany the product to be repaired. This guarantee does
not cover defects to this product which result from normal
wear or improper use, including but not limited to any use in
conditions other that those which are habitual and normal
according to the instructions for use and maintenance as
provided by Lazer Link.
Nor does this guarantee extend to damage caused to the
product by accidents, modification, corrosive materials,
liquids, inadequate ventilation or force majeure. The
guarantee does not cover defects caused by the use
of accessories which are not original Lazer Link parts.
Tampering with any of the labels or seals on the product will
invalidate the guarantee.
This product is covered by a warranty in accordance with the
current provision of laws.
- 8 -
ON Keep the control button pressed until the acoustic signal is heard and the LED flashes in Blue.
OFF Keep the control button pressed until the LED flashes Red.
ANSWER CALL Say any word out loud or press the control button just once.
HANG UP CALL
During the call, press the control button just once.
REJECT CALL Press the control button twice.
ACTIVE VOICE DIALLING Press the control button once, say the name after hearing the acoustic signal.
(ACCORDING TO MOBILE)
RE-CALL (REPETITION LAST NO. DIALLED) Press the control button twice.
CONNECT/START INTERCOM Press the control button for a couple of seconds until you hear an acoustic signal.
DISCONNECT/END INTERCOM
Press the control button for a couple of seconds until you hear an acoustic signal.
The volume in Intercom is changed pressing the control button. Each press changes the level on
VOLUME IN INTERCOM
cycle (low→-> medium→->→high→->→low→...)
Note: In order to save battery, the device will automatically turn off in 4 minutes if it is not connected to
any Bluetooth ® device.
SUmmARY TABLe
- 9 -
21/11/12 11:48