CARLO GAVAZZI PD30CTD10BPIO Serie Manuel D'instructions page 27

2.5.13. LED indication
The LED indication can be configured in 3 different modes: Inactive, Active or Find my sensor.
Inactive: The LEDs are turned off at all times
Active: The LEDs follow the indication scheme in 5.1.
Find my sensor: The LEDs are flashing alternating with 2Hz with 50% duty cycle in order to easily locate
the sensor.
2.5.14. Hysteresis mode
See 2.4.1.3. Hysteresis Settings
2.5.15. Auto hysteresis value
See 2.4.1.3. Hysteresis Settings
27
Rev.01 - 08.2022 | MAN PD30CTD IO-Link ENG | © 2022 | CARLO GAVAZZI Industri