Abus FUBE5 Serie Instructions D'installation Et De Service page 21

Operation
Training in Secvest

Setup Mode Other Devices
Select a Key (Key1, Key2, Key3 or Key4). "Please insert battery" then appears in the display.
Insert the battery. The Secvest Key sends a training signal to the alarm centre. After the Secvest Key has been trained
successfully, a symbol appears next to the selected device.
Assigning the partitions

Setup Mode Other Devices
Select the trained Secvest Key (Key1, Key2, Key3 or Key4). You can then define the partitions that should be switched by the
Secvest Key.
 
Secvest Key Add/Remove Key
 
Secvest Key Edit Key