MSI PRO B650-P WIFI Manuel D'utilisation page 41

JUSB3~4: USB 2.0 Connectors
These connectors allow you to connect USB 2.0 ports on the front panel.
⚠
Important
∙ Note that the VCC and Ground pins must be connected correctly to avoid possible
damage.
In order to recharge your iPad, iPhone and iPod through USB ports, please install
∙
MSI Center utility.
JTPM1: TPM Module Connector
This connector is for TPM (Trusted Platform Module). Please refer to the TPM security
platform manual for more details and usages.
2
1
Pin Signal Name
1 VCC
3 USB0-
5 USB0+
7 Ground
9 No Pin
12
Pin Signal Name
1 SPI Power
Master In Slave Out
3
(SPI Data)
5 Reserved
7 Ground
9 Reserved
11 Reserved
39
10
9
Pin Signal Name
2 VCC
4 USB1-
6 USB1+
8 Ground
10 NC
11
2 1
Pin Signal Name
2 SPI Chip Select
Master Out Slave In
4
(SPI Data)
6 SPI Clock
8 SPI Reset
10 No Pin
12 Interrupt Request