Publicité
Les langues disponibles
Les langues disponibles
SETTING UP YOUR SCANNER
CONNECTING THE ANTENNA
To attach the supplied flexible antenna
to the connector on the top of your
scanner, align the slots around the
antenna's connector with the tabs on the
scanner's BNC connector. Then slide
the antenna's connector down over the
scanner's connector and rotate the antenna
connector's outer ring clockwise until it locks
into place.
CONNECTING AN OPTIONAL ANTENNA
The scanner's BNC connector makes it easy to connect a variety of optional antennas,
including an external mobile antenna or outdoor base station antenna.
NOTE: Always use 50-ohm (RG-58 or RG-213) coaxial cable to connect an outdoor
antenna. If the antenna cable is over 15 meters long, please use low loss coaxial cable
(like RG-213 or similar) . You can get a BNC adapter at your local electronics store.
CONNECTING THE EARPHONE
For private listening, you can plug the supplied earphones (or other headsets with at least
2 x 32 Ohms) into the 3.5 mm headphone jack on top of your scanner. This automatically
disconnects the internal speaker.
English
39
Publicité
