Dometic FO250SA Installation, Usage, Entretien page 27

FO250SA - FO250FSA - FO252SA - FO252FSA
5.2 Installing the flue
CAUTION!
Models FO250SA - FO252SA must be ducted to a roof mounted
flue.
Only install the type of ducting and flue described in these
instructions which can be sourced at Smev or Truma retailers.
The flue and fume ducting must be positioned at a safe distance
from materials which are not resistant to temperatures of 120°C.
 The roof mounted flue must be positioned vertically with a maximum
inclination of 15°. Drill a 60 mm Ø hole in the roof of the vehicle in
proximity of the oven. To avoid damaging or denting the roof when
installing the flue and to ensure sealing if required mount a 1 mm
thickness metal plate to the wall with the hole.
 Install the flue and from the inside of the vehicle secure in place with the
nut. To guarantee the roof is sealed and does not leak, after the oven
has been on for several hours re-tightened the flue fixture nut.
 Mount and install the ducting as illustrated in Fig. 4, page 4. Feed the
ducting into the flue until it stops and secure in place with a self-tapping
screw.

Using ties secure the ducting (Ø 55 mm) and the protective tubing (Ø 65
mm) for their entire lengths to the walls.
EN
Installation
27