Publicité
Les langues disponibles
Les langues disponibles
GAS COMPONENT CONNECTION CHECKS
If the burner will not light or stay lit, please perform the following checks.
1. Make sure the electrode wire is correctly connected.
Both electrode wires must be fully inserted into the igniter box.
2. Make sure that the igniter box is unobstructed.
Clear any debris on top of the igniter box and mak e sure there is no debris
between the igniter pin, thermocouple and the burner tube.
CORRECT
Igniter Box
Burner
Tube
Do not block
opening
INCORRECT
17
Publicité
