Avson BMW HP4 RACE 370-211V80 Mode D'emploi page 6

Inside of right rear wheel Inside of right rear wheel
3
8
Remove all the parts from the rear axle. Turn the vehicle body upside down.
1. Slide the right rear wheel onto the rear axle from the left side of the vehicle body, and
make it match up with the motor on the vehicle body.
2. Slide a Ø10 washer onto the rear axle.
3. Tighten a lock nut to the end of the rear axle with a spanner.
4. Slide the Ø10 washer on the other side of the rear axle.
5. Slide the left rear wheel onto the rear axle.
6. Slide another Ø10 washer onto the rear axle.
7. Tighten a lock nut to the end of the rear axle with a spanner. TIP: An extra spanner
has been provided to hold the Lock Nut on the other side of the rear axle while
tightening the Lock Nut on the other side.
8. Fit the hubcaps to the both rear wheels.
1WD
Attach the Rear Wheels │ 5
2
1
4 5
6/27
Gear box
Rear Bottom View
Inside of left rear wheel Inside of left rear wheel
6
7
8