Franke FCR 708-H TC Mode D'emploi Et Installation page 10

These can be washed in the dishwasher, and need to be cleaned
whenever the Drop symbol appears on the display or at least
once every 2 months use, or more frequently if use is particularly
intensive.
Resetting the alarm signal
• Press button G and hold it for at least 2 seconds.
Cleaning the Filters
• If closed, open the Carriage by pressing button A and holding
for at least 1.5 seconds (see USE).
• Open the comfort panel.
• Remove the Filters one at a time, pushing them towards the
back of the unit and at the same time pulling downward.
• Wash the Filters without bending them, and leave them to dry
completely before replacing. (If the surface of the filter
changes colour as time goes by, this will have absolutely no
effect on the efficiency of the filter itself.)
• Replace, taking care to ensure that the handle faces forwards.
• Close the comfort panel.
EN
Metal grease filters
1
10
0